Hunter Irrigation WR-CLIK-TR

- To prevent water waste, built-in Quick Response technology instantly shuts down irrigation as soon as it starts raining
- Instant Quick Response rain shutoff and freeze shutoff at 37°F
- Maintenance-free design with integrated battery for wireless models
- Adjustable vent ring allows for shorter or longer reset period

## Set Wireless Rain-Clik Transmitter Address

Only needed if transmitter or receiver is replaced, or purchased separately.

Step 1: Remove power from the controller.
Press and hold the Bypass button on the receiver.

Step 2: While holding the button, restore power.
The sensor LED should turn amber, indicating the receiver is ready to pair.

-
Step 3: Press and hold the Quick Response button on the transmitter for 5 seconds.

-
Step 4: Within 4 seconds, the receiver LED should turn red, meaning the address was learned.

Step 5: Release the transmitter button.
The LED should turn green to confirm successful pairing.

Note: When power is restored, the LED may stay red while syncing (up to 1 hour).
To sync immediately, press and hold the "Test" button for 5 seconds, then release. The LED should turn green.